Handy Tool Guide

BubbaDeals.com has the Gorilla Gripper Plywood Gripping Tool on offer for $49.95. 'Finally, a safe and easy way to lift and carry heavy sheet goods such as drywall and plywood. Gorilla Gripper is an essential, new gripping hand tool designed for lifting, carrying and moving a variety of building materials that are large and unwieldy. Handles sheet goods from 3/8 inch to 1-1/8 inch thick. The Gorilla Gripper simply slips over the center of the panel. When you lift, it grips using the weight of the material to add super strength to your grip. You'll be amazed at how easily you are able to lift the panel.'

Continue reading "Gorilla Gripper Plywood Gripping Tool for $49.95 @ Bubba Deals" »

Posted by Admin at 1:15 PM | Permalink | Comments (0)

The Gadgeteer have published a review of the Coast C5795 11 Function Multi-Tool Deluxe. 'The thickness of the C5795 is 1 inch, which is pretty thick for a tool that you need to grasp in your hand in order to use it. Comparing it with two of my favorite mulit-tools, the Gerber MP800 and the SOG S63 EOD PowerLock, it definitely felt less comfortable gripped in my hand. This tool does have plastic grips, but they aren’t soft and the edges aren’t rounded enough to be comfortable in hand. I have soft girly hands, so I may just be a wimp, but I would guess that even someone with callused hands would not find the grips on this tool to be optimal after several minutes of use.'

Continue reading "Review: Coast C5795 11 Function Multi-Tool Deluxe - The Gadgeteer" »

Posted by Admin at 3:40 PM | Permalink | Comments (0)

Amazon.com has the Black & Decker AAW100 8-Inch Auto Wrench Adjusting Wrench on offer for $29.99 plus free standard shipping. 'The Auto Wrench is not meant to replace specialty tools like pipe or torque wrenches, but the jaws open wide enough (up to 1-1/4-inch) so that it could conceivably replace a range of manual wrenches sitting in your toolkit. This is an ideal product for someone looking to buy a wrench that’s both easy to use and versatile. At 8-inches, you could toss it in the silverware drawer and whip it out when you need it.'

Continue reading "Black & Decker AAW100 8-Inch Auto Wrench Adjusting Wrench for $29.99" »

Posted by Admin at 11:16 PM | Permalink | Comments (0)

BubbaDeals.com has the Alden Pro Grabit 4-Piece Damaged Screw Remover on offer for 19.95. 'Extract rusted or damaged screws and bolts from any material, like a professional. The ProGrabit is made from tempered steel and is stronger than the Grabit. ProGrabit is a drill and extractor in one tool that removes screws or bolts with any type of damaged head, from any material. No more guesswork in matching drill size with extractor, as with manual tools. ProGrabit's quick connect chuck capability increases its ease of use. Simply drill, then flip and extract.'

Continue reading "Alden Pro Grabit 4-Piece Damaged Screw Remover for $19.95" »

Posted by Admin at 12:59 PM | Permalink | Comments (0)

Press Release

Toronto, ON., Hitachi Power Tools today announced a new 3-1/2” Wire Weld Framing Nailer, the NR90AF. The lightweight design and powerful driving, typical of a Hitachi quality tool, are now available in a nailer for offset round head wire weld nails. Full of features for convenient operation and superior performance, this nailer is ideal for framing, siding, decking, pallet assembly, trusses and sheathing.

Continue reading "Hitachi Introduces New Framing Nailer for Wire Weld Fasteners" »

Posted by Admin at 11:45 PM | Permalink | Comments (0)

Auto Express have published their review of twelve sets of screwdrivers. 'The days of ’drivers with shafts you could virtually bend in your fingers and handles that shattered at the slightest tap are thankfully behind us. Picking a set now is all about grip, comfort and what you get in the box. Even budget kits are capable of fulfilling most DIY mechanics’ demands, so makers have put a lot of effort into handle design and finding ways to provide extra strength. Which are the head turners? We tested a dozen sets.'

Continue reading "Screwdrivers Tested - Auto Express" »

Posted by Admin at 11:37 PM | Permalink | Comments (0)

RIDGID® has introduced the RC-2375 large diameter ratcheting plastic pipe and tubing cutter which features a quick-change blade pin which allows the user to change blades in a matter of seconds without tools. 'The lightweight RC-2375 conveniently fits in one's pocket and is operated with one hand, making it easier for users to hold tubing. An easy turn thumb latch holds the cutter closed and protects the blade when the cutter is not in use. For convenience, ergonomic grips built into the bottom handle are spaced at 1/2-inch increments to provide a quick pipe measuring scale.'

Continue reading "RIDGID RC-2375: Large Diameter Ratcheting Plastic Pipe and Tubing Cutter" »

Posted by Admin at 11:00 PM | Permalink | Comments (0)

Amazon.com has the IRWIN 15 ProTouch Coarse Cut Carpenter Saw on offer for $10.60 plus shipping. 'Patent pending advanced tooth geometry and Tri Ground teeth provide a fast, efficient cut. Deep Gullets provide rapid removal of chips. Easy Start front teeth: 12pt. extra fine front teeth provide a rapid, smooth start. From the innovative M2(TM) Tooth Technology and Easy-Start(TM) Teeth to the ergonomic ProTouch(TM) handle - professional users will experience a new level of cutting performance.'

Continue reading "IRWIN ProTouch Coarse Cut Carpenter Saw for $10.60 @ Amazon" »

Posted by Admin at 4:09 PM | Permalink | Comments (0)

Wright Tool have introduced their new adjustable wrenches which are offered in 8 lengths from 4-24 in. with chrome or black oxide finish as well as laser-etched inch and metric gradient scales. 'The extra-wide jaw opening is standard on lengths 6 inches to 12 inches to accommodate bigger nuts and bolts. The new jaw design provides a better grip, which avoids slippage or nut round off, while its creep feed ground parallel face assures smooth, tight operation. The jaw is also longer and thinner, increasing the performance of the wrench. The tool's four-thread knurl and non-protruding jaw offer greater capacity and minimal head width, improving performance in confined spaces.'

Continue reading "Wright Tool's New Adjustable Wrenches Accommodates Bigger Nuts and Bolts" »

Posted by Admin at 10:25 PM | Permalink | Comments (0)

Auto Express have published their review of twelve sets of lock grip pliers. 'Ideally a set should have at least four pairs of pliers with flat, curved and long nose jaws, as well as one compact tool. To test their mettle, we tried to loosen wheel nuts tightened to various torques. After these tests, we made sure the adjuster screws still worked perfectly – as threads on some can fail after hard usage. Extra points were awarded for those supplied with cases or wallets, wide opening jaws on the larger tools and overall performance from the wire cutter.'

Continue reading "Lock-grip Pliers Tested - Auto Express" »

Posted by Admin at 11:45 PM | Permalink | Comments (0)

Press Release

SYCAMORE, IL, IDEAL has expanded its offering of durable, highly functional hand tools with the introduction today of its redesigned Triple Tap threading tool. Whether it's forming new screw threads, cleaning out obstructions, or retapping burred and stripped threads, the Triple Tap is ready to tackle any job the professional contractor or do-it-yourselfer throws at it.

Continue reading "IDEAL Redesigns Triple Tap Threading Tool With Textured, Comfort-Enhancing Grip" »

Posted by Admin at 10:16 PM | Permalink | Comments (0)

Press Release

New Torpedo Levels Are Strongest, Most Accurate In Industry

FRANKFORT, Ill. – Swanson Tool Company, a leading manufacturer of layout and leveling tools, announces the launch of a new professional line of precision-machined, solid-billet aluminum torpedo levels, the 9” Savage™ and 6” Lil’ Savage™. The levels are equipped with the most innovative and time-saving features of any level on the market today, all in one pocket-sized, lightweight tool – perfect for contractors and electrical and plumbing professionals.

Continue reading "Swanson Tool Co. Introduces Savage(TM) and Lil' Savage(TM) Torpedo Levels" »

Posted by Admin at 4:30 PM | Permalink | Comments (0)

Press Release

LINCOLNSHIRE, ILL – May 2008 – Klein Tools’ new Journeyman™ line of screwdrivers features advanced blade technology for superior blade strength and exclusive Journeyman design for maximum turning power.

The sleek, tri-lobe handle features an ultra-comfortable soft outer grip bonded to a solid inner core for generating the maximum amount of turning power while providing exceptional control, grip and balance. Klein’s patented Tip-Ident® dome mark allows for instant tip recognition and orientation for quick and accurate alignment to the fastener.

Continue reading "Klein Tools Introduces High-Performance Journeyman™ Screwdrivers" »

Posted by Admin at 10:11 PM | Permalink | Comments (0)

A “Hands on” review of the Husky 5-in-1 Drywall Tool has been posted over at Toolmonger. ‘To test the 5-in-1, we built a wall simulator — a free-standing “wall” with a few electrical boxes inside covered completely with fresh drywall. Then we tried cutting holes for those boxes. It’s a relatively easy task: locate the box. Punch a hole. Twist the corner. Saw out the rough hole. Surprisingly, the 5-in-1 features tools for all these steps. While the Husky’s saw-without-a-point can’t poke a hole, the tube/seal punch awl makes a fine hole. We were concerned that prying with the saw might snap it, but the tool’s pry bar is quite sturdy. Switching between the tools is a bit annoying, though.’

Continue reading "Husky 5-in-1 Drywall Tool Review - Toolmonger" »

Posted by Admin at 3:59 PM | Permalink | Comments (0)

A review of the Bulldog Stubby Screwdriver and the Crescent Dura-Driver Ratcheting Screwdriver has been posted over at Web Bike World. 'The Bulldog stubby screwdriver is a really handy little tool for motorcycle use -- I keep it in my tank bag, but it will fit just about anywhere -- in a pocket; under the seat; in the motorcycle's tool case; in the tail section...Unscrew the top of the handle and inside are six little hex bits: a #1 and #2 Phillips; a 1/8" and a 1/4" flat screwdriver; and an S1 and S2 square drive. The bit holder on the screwdriver has a strong magnet to hold the bits, and the handle has a hard rubber "comfort grip".

Continue reading "Review:Bulldog Stubby Screwdriver and Crescent Dura-Driver Ratcheting Screwdriver - Web Bike World" »

Posted by Admin at 10:48 PM | Permalink | Comments (0)

Press Release

Bondhus Corporation, through its' German marketing partner - FELO, introduces a revolutionary new screwdriver line featuring the patented ERGONIC handle. The Ergonic is the first screwdriver handle that truly conforms to the user’s hand, increasing comfort while significantly increasing torque transmission capability. Each screwdriver blade is machined to exacting German standards, and the result is a screwdriver that delivers fantastic performance and lasts virtually forever. A wide selection of screwdrivers are available in standard and insulated versions.

Continue reading "Finally! The Worlds First True Ergonomic Screwdriver" »

Posted by Admin at 1:09 PM | Permalink | Comments (0)

Press Release

ROCKFORD, Ill.Greenlee, a Textron Inc. (NYSE: TXT) company, now offers a hand-held cable cutter with molded grips that feature a hard underside for strength and a soft, slip-resistant, ergonomic outside for increased comfort. The grips on the 727M are also designed with extra-width to provide a larger load bearing area that makes it easier on the hands. While users can feel the difference that the softer, wider grips provide, Greenlee will still make the original 727 cable cutter available. These tools easily cut copper and aluminum cables up to 2/0 AWG (70 mm2).

Continue reading "Greenlee Offers New Hand-Held Cable Cutter with Extra-wide Molded Grips" »

Posted by Admin at 10:37 PM | Permalink | Comments (0)

Press Release

Crimps both insulated and uninsulated terminals from 10-22 AWG

ROCKFORD, Ill. February 27, 2008 —Greenlee, a Textron Inc. (NYSE: TXT) company launched its new KP1022 crimper. This new tool is designed with two die positions making it capable of crimping both insulated and uninsulated terminals and splices from 10-22 AWG. The cutter has long curved handles and double cushioned grips to provide good leverage and comfort and it’s easy to carry in a tool pouch.

Continue reading "Greenlee’s New KP1022 Crimper is Two Crimping Tools in One" »

Posted by Admin at 10:41 PM | Permalink | Comments (0)

The Gadgeteer have published a review of the Zibra "Open It" package opener which is designed to open all types of retail packaging. ‘Available in 5 colors including Fire Orange, Berry Red, Midnight Black, Mocha and Sky Blue, I was sent the Orange model. Measuring 8.5 inches from end to end, these rubber gripped shears will fit in almost any toolbox or tool drawer. The spring loaded handles lock closed for storage, by using an easy to use latch built into the handles. The angled and offset jaws are made of thick hardened alloy steel.’

Continue reading "Review: Zibra "Open It" Universal Package Opener – The Gadgeteer" »

Posted by Admin at 10:14 PM | Permalink | Comments (0)

Press Release

Minneapolis, Minnesota: Kurt Manufacturing now offers its popular 5-Axis clamping system in a low profile model (VB 5AX100-L) with clamping height above the machine table of 100 mm (3.937 inches). This new low profile 5-Axis clamping system provides extra part clearance for applications requiring continuous 5-axis cutting motion of complex pockets, sculptured and contoured surfaces, and intricate 3-D features with repeatable high precision accuracy.

Continue reading "New, Low Profile 5-Axis Vise Now Available From Kurt--Provides More Machining Center" »

Posted by Admin at 10:05 PM | Permalink | Comments (0)

Press Release

LINCOLNSHIRE, IL – January 2008 – Klein Tools recently added three new Bent-Nose NM Romex® Strippers (Cat. Nos. K90-10/2, K90-12/2, and K90-14/2) with Klein-Kurve® handles to its existing line of strippers and cutters.

Continue reading "Klein Tools Introduces Bent-Nose NM Romex® Strippers" »

Posted by Admin at 9:20 PM | Permalink | Comments (0)

Midwest Tool and Cutlery Company has introduced the KNIFTI-CUT(TM) Shop/Electrician Shear and Utility Snip which features textured plastisol grips and hot drop-forged blades manufactured of high carbon steel. 'The Made in USA KNIFTI-CUT(TM) (Model No. P657N) can be used: to shear sheet metal, vinyl, plastic, screening, packaging, cardboard, canvas, leather and paper; to snip soft wire, wire mesh, strapping, cable ties, fishing line, poultry and flowers/twigs; to strip coated/insulated wire. The tool's hot drop-forged blades are manufactured of high carbon steel for strength, durability and long lasting cutting edge. Hot-drop forged blades make it tough enough to readily cut sheet metal. Rated cutting capacities are: 26-gauge cold rolled sheet metal; 18-gauge copper wire; 22-gauge soft steel wire.'

Continue reading "New KNIFTI-CUT Shop/Electrician Shear and Utility Snip suited for universal applications" »

Posted by Admin at 3:46 PM | Permalink | Comments (0)

Klein Tools has extended its line of strippers and cutters with the addition of the new QTR-Turn(TM) NM cable stripper/cutter with Klein-Kurve® handles which cuts and loops 12 and 14 AWG solid wire, and cleanly shears 6-32 and 8-32 screws. 'The new cable stripper/cutter utilizes exclusive QTR-Turn technology to quickly remove the outer jacket of NM cable. The user places the cable in the upper QTR-Turn jacket stripper, squeezes the handle and turns one quarter (90 degrees) to completely sever the outer jacket. The QTR-Turn NM cable stripper/cutter has spring-loaded action for self-opening.'

Continue reading "New Klein-Kurve Dual NM Cable Stripper/Cutter features serrated nose to bend, shape, and pull wire." »

Posted by Admin at 9:47 PM | Permalink | Comments (0)

Press Release

Use to Apply Adhesives, Filler, Compound, Spackle and More

K-Tool International (KTI), a leading manufacturer of tools for the automotive aftermarket and professional mechanic, will introduce a four-piece scraper set to its product line.
Ideal for removing paint, rust, gaskets, carbon, filler and undercoating, each scraper boasts a polished, mirror-finished, hardened steel, full-tang blade, and a grommeted brass, solvent-resistant, riveted wood handle.

Continue reading "No More "Just Scraping by" with New KTI Scraper Set" »

Posted by Admin at 9:32 PM | Permalink | Comments (0)

ACT Fastening Solutions has introduced the new ACT Cable Tie Removal Tool which is made from heat-treated alloy steel and features cutting head with smooth, curved tips that slip behind cable tie to pull it away from wire harness and simultaneously cut it without nicking or damage. 'Providing double insulated and cushioned grips, a return spring, lock, and properly leveraged scissor-action cutter, the rugged ACT Cable Tie Removal Tool is made from heat treated alloy steel. Suitable for retrofitting and repairing wire harnesses in assembly and field service applications, it can safely remove plastic, copper, or aluminum cable ties up to 1/2" wide.'

Continue reading "ACT Cable Tie Removal Tool" »

Posted by Admin at 9:21 PM | Permalink | Comments (0)

Cooper Hand Tools has introduced the new Crescent® brand line of Pro Series solid joint pliers and cutters which are forged from special alloy steel and feature laser-hardened cutting edges, polished heads, and co-molded grips. 'Crescent® brand Pro Series solid joint pliers and cutters are available in multiple sizes and all popular configurations. Many models offer additional features, such as the 9-inch lineman's pliers (Model 20509CMG), which includes an integral crimper and fish tape puller.'

Continue reading "New Crescent Pro Series joint pliers feature laser-hardened cutting edges" »

Posted by Admin at 8:29 PM | Permalink | Comments (0)

Seatek has introduced the new Roto-Split RS-101AC Auto Clamping MC Cable Cutter which has a depth of cut adjustment lever which switches between standard MC and new brands of reduced diameter MC such as Southwire MCAP cable. 'The RS-101AC features a new exclusive auto clamping lever with unique clamping stroke amplification. This patent pending design eliminates the slow thumb screw clamping adjustment needed for various cable sizes. Simply squeeze the lever to automatically clamp any size cable. Moreover, the RS-101AC clamping system prevents crushing softer aluminum casing.'

Continue reading " Roto-Split RS-101AC Auto Clamping MC Cable Cutter" »

Posted by Admin at 8:21 PM | Permalink | Comments (0)

The Ridge Tool Company has added the new RIGID RC-1625 Plastic Pipe and Tubing Cutter to its’s product offering. 'The cutter's advanced blade profile combined with the ratcheting mechanism work together to reduce the amount of hand force needed to cut through hard plastic material. A quick-change blade pin enables users to change blades by hand in a matter of seconds, saving valuable time. The quick-change pin also assures users that there will be no lost clips or screws during a blade change.'

Continue reading " RIGID RC-1625 Plastic Pipe & Tubing Cutter" »

Posted by Admin at 10:17 PM | Permalink | Comments (0)